Commercial Floor Stripping & Waxing in Omaha, NE
Resilient VCT Floor Restoration and High-Gloss Protection
Omaha Cleaning Connection delivers commercial floor stripping, neutral rinsing, and multi-coat high-solids waxing for businesses throughout Greater Omaha. High-traffic commercial facilities face continuous foot traffic, grit, and scuffing that degrade factory coatings, leaving vinyl composition tile (VCT) dull and vulnerable to permanent damage. Our crew uses industrial rotary stripping equipment to remove old finish, neutralizes the tile, and applies multiple coats of commercial wax for a clean, durable shine.
What Our Commercial Floor Service Includes
Our commercial hard-floor refinishing restores dull VCT surfaces, adds slip resistance, and protects your flooring investment.
Flickering Lights
Flickering or dimming lights often point to loose connections or wiring issues.
Complete Chemical Wax Stripping
Application of commercial stripping agents that dissolve yellowed, scratched, and aged floor finish down to the bare tile.
Heavy-Duty Mechanical Stripping
Low-speed rotary machines equipped with abrasive stripping pads that break loose embedded soil and finish build-up along baseboards.
Slurry Vacuum Extraction
High-capacity wet-vacuum recovery removing dissolved wax slurry to prevent chemical re-bonding on tile surfaces.
Neutralizing Water Rinse
pH-balancing rinse washes removing chemical stripper residue, ensuring a clean foundation for new wax adhesion.
Multi-Coat High-Solids Wax Finish
Application of premium commercial floor wax formulated with high polymer solids, building a tough, scuff-resistant protective shell.
High-Speed Burnishing and Polishing
Optional high-speed buffing between cured finish coats to enhance surface gloss, slip resistance, and finish hardness.
Our 4-Step Floor Stripping and Waxing Process
Area Preparation and Chemical Stripper Application
We clear entryways, protect baseboards, and apply commercial floor stripper across the floor to dissolve old wax coatings.
Rotary Machine Stripping and Edge Scraping
Our crew runs commercial rotary floor machines with stripping pads across the floor, scraping corners and edges by hand to remove all old finish.
Slurry Extraction and Neutralizing Rinse
We vacuum up dissolved wax slurry using industrial wet extractors and rinse the bare tile with pH-neutralizing wash water.
Multi-Coat Wax Application and Curing
We apply multiple even coats of commercial high-solids floor wax, allowing each coat to dry thoroughly to achieve a high-gloss, slip-resistant finish.
Why Property Owners Trust Omaha Cleaning Connection
Industry Experience
Local Business
Honest Estimates
Accredited Service
Extended Travel
Commercial Equipment
Complete Decontamination
Female Crew
Indicators Your Commercial Floors Need Stripping
Floor finish appears dull, faded, or yellowed despite daily dust-mopping and buffing.
Visible black heel scuffs and soil lines embedded beneath existing wax layers.
Wax peeling, flaking, or powdering away around heavy foot-traffic pathways.
Dirty, discolored wax buildup visible in corners and along baseboard edges.
Tile surfaces showing micro-scratches from grit that expose bare vinyl composition tile.
More than twelve months have passed since the last complete chemical stripping.
When Should You Strip Floors Instead of Buffing?
High-speed spray buffing and burnishing work well for routine maintenance, but they only polish the top layer of existing wax. Once dirt and oils become embedded within aged wax layers, or the finish turns yellow along perimeter walls, complete chemical stripping is necessary to restore the tile.
Frequently Asked Questions
How many coats of wax do you apply to commercial floors?
We typically apply three to five thin, even coats of commercial high-solids floor finish, depending on traffic levels and facility requirements. Each coat is allowed to cure fully before the next layer is applied.
Can you strip and wax commercial floors after regular business hours?
Yes. We offer flexible evening and weekend scheduling for commercial facilities across Greater Omaha, allowing stripping, waxing, and curing to take place without disrupting normal business operations.
How long does newly applied floor wax take to cure?
Light foot traffic is typically safe within 2 to 4 hours after the final coat dries. We recommend allowing 24 hours of curing before returning heavy equipment or rolling carts to the floor.
What types of commercial commercial facilities do you service?
We provide floor stripping and waxing for corporate offices, medical suites, daycares, retail storefronts, schools, churches, and common areas in multi-family properties throughout Greater Omaha.
How often should commercial VCT floors be completely stripped?
High-traffic facilities typically require complete stripping and refinishing every 12 months, with routine buffing and re-coating performed semi-annually to maintain gloss and protection.
Our Service Coverage
Omaha, NE
La Vista, NE
Papillion, NE
Ralston, NE
Bellevue, NE
Gretna, NE
Plattsmouth, NE
Fremont, NE
Bennington, NE
Blair, NE
Wahoo, NE
Lincoln, NE
Greenwood, NE
Ashland, NE
Outside our standard area? We’ve got you covered. Omaha Cleaning Connection travels up to 150 miles from Omaha for air duct cleaning. If you don't see your community listed, reach out to us directly—we’d love to see how we can help!